"PLUG-IT" System

No soldering necessary when you use our plug, socket and wire connecting system. This system includes Power Supply, Connecting Leads and Switches. Simply use these elements to connect from the power source to each lamp or signal. All elements are interchangeable so can be used in any order.

The below diagram shows how these may be used. The On-Off Switch and Dimmer Switches are optional. Adding On-Off or Dimmer Switches can control a whole system, a selection of lights or individual lights depending on where connected. 

A mixture of lights and signals can be included. (See Signals page for more information)

The "PLUG-IT" lead supplied with the Power Transformer has a socket which is intended to mount on a baseboard. The lead attached to this  is the start from which a lighting system can be developed. The Power Transformer lead plugs into this socket and allows disconnection if required.

Each light and accessory is provided with instructions. 
 NB: The wires attached to lights an signals are typically 15cm long.

 "Plug-it" basic wiring diagram (see below for the "Plug-it" wiring elements)

Use these "Plug-it" elements to create your own lighting system